Vista Clara and ConeTec recently partnered to deploy a Vista Clara Dart Nuclear Magnetic Resonance (NMR) probe via a cone penetrometer test (CPT) rig to measure water content and porosity in a mine tailings facility. Vista Clara geophysicists collected CPT-NMR logs to depths of 75ft in tailings material at the mine site. Additionally, they logged NMR in an adjacent cased hole using a wireline-based Javelin system for comparison and validation of NMR data collected using direct push and traditional drilling. This is possibly the first deployment of an NMR logging tool via a CPT vehicle.

Morenci Mine NMR analysis

Figure 1 – ConeTec CPT rig deploying Vista Clara Dart DP140 NMR tool, at a mine tailings facility.

Figure 2: Dart DP140 NMR tool being deployed through the CPT drill rods.

 

The Dart NMR logging tool provides direct, in-situ measurement of volumetric water content, porosity (e.g. void ratio) and pore size distributions with high resolution, precision and relatively low cost. These water bearing parameters, particularly the saturation and void ratio, are critical to the geotechnical and hydrological properties of tailings structures.

The direct push deployment used 2.25in Geoprobe drill rods deployed using a ConeTec CPT vehicle (shown in Figure 1). The drill string was pushed to depth, the Dart probe (shown in Figure 2) advanced to the bottom of the rod string, and NMR measurements taken in a stepwise manner while retracting the rod string.

One of the CPT-NMR logs is shown in Figure 3. Excellent agreement was achieved between the CPT-NMR logs and the Javelin NMR log performed in a nearby pvc-cased borehole hole.

MorenciMine-data

Figure 3: Dart CPT-NMR log in mine tailings facility. The CPT-NMR log reveals variable water filled pore size distributions, with significant water content held throughout the tailings, and an apparent zone of complete saturation starting at depth of 45 feet.